MBRP Diesel Exhaust
MBRP Exhaust kits available in direct bolt on, stainless steel
or aluminized, turbo back and cat back performance exhaust systems for todays
diesel and gasoline trucks. All MBRP Exhaust systems feature smooth mandrel
bends, OEM style hangers and a quality seamless straight through muffler. Choose
from 4" or 5" configurations and single or "Cool Dual" MBRP Exhaust systems.
With a quality MBRP Performance Exhaust system, you can expect an increase in
power and fuel economy, as well as lower exhaust temperatures.
If you do not see a MBRP high performance exhaust kit for your
application, just give us a call at 1-800-823-4444 and one of our high performance
exhaust specialists will be happy offer suggestions on the best exhaust for
you. You may also inquire via email at firstname.lastname@example.org
Below are a few commonly asked questions about MBRP Exhaust Systems:
WHAT IMPROVEMENTS CAN I EXPECT IN TORQUE, HP AND TEMPS FROM A
MBRP EXHAUST KIT?
While performance gains vary depending on the vehicle you can
expect a gain of 5% to 10% in horsepower and torque. For example, with a 2005
Chevrolet Silverado with a Duramax diesel engine you will see a gain of 18 HP.
and 28 ft/lbs measured at the rear wheels. You can also expect a reduction in
exhaust gas temperature (EGT) by approx 200º F.
IS THERE A DIFFERENCE IN PERFORMANCE BETWEEN MBRP DUALS AND SINGLE
The performance gains are the same for MBRP duals and single systems.
The duals offer a deeper more aggressive sound over the single system. This
is due to the extra tail pipe and the fact that most dual systems have a slightly
different muffler configuration than the single systems.
WHAT DOES "OFF - ROAD" MEAN?
An MBRP "Off-road" system is designed to deliver all out power
gains. These systems make no provisions to retain the factory catalytic converter.
Some jurisdictions do not allow the removal of your vehicles catalytic converter
therefore they can only be legally used off of the highways.
WILL I BE ABLE TO KEEP MY SPARE TIRE IN, IF I GET THE MBRP COOL
Generally, MBRP designs all of its systems to retain the factory
spare tire . The only exception to this is the "Cool Duals" system for the Chev/GMC
Colorado and Canyon (Part No. S5028AL,S5028304, S5030AL, S5030304).
DO YOUR MBRP EXHAUST KITS INCLUDE ALL CLAMPS & INSTRUCTIONS?
MBRP kits come complete with all the required hardware as well
as clear, easy to read instructions with lots of pictures to help you work your
way through your installation.
WILL I HAVE TO WELD ANY COMPONENTS WHEN INSTALLING AN MBRP SYSTEM?
No, MBRP exhaust systems do not require any welding. In fact,
MBRP systems can be installed using common hand tools.
WHAT SIZE IS AN MBRP EXHAUST?
MBRP diesel exhaust systems use 4" pipe. Some of the diesel systems
come with a 3.5" down pipe due to fit issues. MBRP single systems for gas powered
trucks use 3.5" tail pipes while the “Cool Dual" systems use 2.5" tail pipes.
WHAT IS THE MBRP DOWN PIPE SIZE FOR THE FORD?
There are a few different sizes for down pipes for Ford trucks.
For 94-97 trucks the pathway for the down pipe is very restrictive. In fact,
the factory down pipe for these trucks are flat, approximately 1.5" in height.
Our down pipe is 3" in diameter. For the 99-03 model years with a 7.3L Power
Stroke Diesel the down pipe is 4" and the 03-06 model years with a 6.0L Power
Stroke Diesel the down pipe is 3.5".
WILL AN MBRP SYSTEM FIT TO MY TRUCK BED SIZE?
All of MBRP systems for either gas or diesel powered trucks fit
all bed sizes and cab configurations.
DOES MBRP MAKE AN EXHAUST FOR THE FORD F450 OR F550?
MBRP now offer both a cat back and a turbo back system for the
6.0L Ford F350/F450/F550.
DOES MBRP BUILD STACKS FOR MY TRUCK?
Yes they do!